LTV 621
THE VERTICAL EDGE POLISHER FOR ROUND AND STRAIGHT EDGES UP TO A 6CM THICKNESS
It is equipped with:
-
Electronic management of pneumatic mandrels (PLC) by means of a touchscreen control panel
-
no. 1 CALIBRATION MANDREL to gauge thickness at an adjustable depth (max. 60 mm). The mandrel can be adjusted both laterally and longitudinally with respect to its supporting shaft; moreover, it can be rotated from 0° to 90°, and can also be used to carry out slotting for the drip stone; for Ø 250 mm tools.
-
no. 2 OPPOSING MANDRELS INCLINED AT 45° to cut chamfers and/or bevels of various dimensions. Whenever you need to carry out rounded profile edges, these mandrels, thanks to the use of specific diamond conetrunk grinding wheels greatly help the shaping made by the oscillating mandrels to the desired edge shape; for Ø 130 mm wheels.
-
no. 6 OSCILLATING MANDRELS of which the first two are ready to be equipped with cup-shaped diamond grinding wheels in order to carry out the shaping of the rounded profiles or the grinding of the flat, squaredoff or inclined profiles. The other four mandrels are equipped with polishing and smoothing abrasive grinding wheels. If necessary all the 6 mandrels can be equipped with abrasive grinding wheels; for Ø 130 mm wheels.