LCT 521

Τhe vertical polisher for straight (up to 6 cm) or round (up to 4 cm) edges

1/10

LCT521

THE VERTICAL POLISHER FOR STRAIGHT (UP TO 6 CM) OR ROUND (UP TO 4 CM) EDGES

 

It is equipped with:

  • no. 1 CALIBRATING MANDREL to gauge thickness at an adjustable depth (max 6 cm). This mandrel can be adjusted both transversely and longitudinally with respect to the tool axle. Moreover it can be rotated from 0° to 90°, and can also be used to carry out housings for the dripstone; for Ø 250 mm tools.

  • no. 2 OPPOSED MANDRELS INCLINED AT 45° for chamfers and/or bevels of various dimensions. If you  need to carry out round profiled edges, these mandrels, thanks to proper conicaltruncated diamond wheels,  greatly help the following shaping of the oscillating mandrels that mill edges; for Ø 130 mm wheels.

  • no. 5 OSCILLATING POLISHING MANDRELS, with hydraulic motors and pneumatic actioning. The first one equipped with a FEELER PIN (PROBE) for shapes copy (shapes with 10, 15 and 20 mm radius supplied with the machine) and mechanical stop for the use of a cup shaped diamond wheel. For Ø 130 mm wheels.