
HTO-R
The CNC bridge sawing machine with turning head and stationary table. 3 or 5 axis




ΗΤΟ-R
The CNC bridge sawing machine with turning head and stationary table. 3 or 5 axis
Suitable for many different cutting works on slabs with a total thickness of 10 – 175 mm.
-
Available in 2 versions:
-
HTO-R1: the manual work mode, semi-automatic and automatic, with inclinable head from 0 ° to 90 ° with a 45 ° step and rotating from 0° to 180°;
-
HTO-R2: the manual work mode, semi-automatic and automatic, with tilting head from 0 ° to 90 ° with a 45 ° step and rotating from 0° to 180° (optional up to 360°); 5th axis on request;
-
-
Several accessories available
-
Available cutting: 3500 x 2650 mm
-
Disc: 300 – 500 mm
-
Power: from 11 kW
-
STRUCTURE: on concrete walls (or steel walls on request)
-
Single beam BRIDGE made of structural steel framing. Bridge translation on linear guides with sliding blocks (4-ways recirculation). Centralized greasing blocks and water/dust protections. Movement powered by a precision brushless motor on racks with inclined teeth.
-
SLIDING OVERHEAD SUPPORT running along the bridge on Linear guides with sliding blocks (4-ways recirculation). Centralized greasing blocks and water/dust protections. Movement powered by a precision brushless motor on racks with inclined teeth.
-
11 kW / 15.1 hp (S6) DISC ELECTRO-SPINDLE
-
HTO-R1: inclinable from 0 ° to 90 ° with step at 45 ° – Manual inclination by handwheel and displayed on control panel – and rotating from 0 ° to 180 ° (± 3 °), motorized and controlled movement.
-
HTO-R2: inclinable from 0 ° to 90 ° with step at 45 ° and rotating from 0 ° to 180 ° (± 3 °) (optional from -3 ° to + 363 °), with motorized and controlled movements.
-
-
PROGRAMS:
-
HTO-R1: multiple measures program, parallel cutting. Vertical and inclined step cutting routine. Differently oriented cuts in manual and automatic mode;
-
HTO-R2: multiple measures program, parallel cutting. Vertical and inclined step cutting routine. Differently oriented cuts in manual and automatic mode. Curbed cuts with the disc program. Optional: router bits and candle tools;
-
-
CONTROL BOARD supported by an articulated arm and containing all the necessary controls, 17′ “touch screen” programmer inclusive.